Is it Safe to Use a Hot Tub Without Chemicals?
Use a Hot Tub Without Chemicals
You may be wondering, “Is it safe to use a hot tub without chemical treatments?” Well, the answer depends on your specific situation. Basically, if the water is not treated, bacteria can start growing within a couple of days. This is because bathers wash in dirt, sweat, and oil which can all contribute to the growth of bacteria. These particles, combined with urine and fecal matter, create a perfect environment for bacteria.
There are a few ways to keep your hot tub water clean without using any hot tub chemicals. The first step is to make sure your hot tub cover is closed. Also, it is important to not leave debris in the water. Another step is to take a shower before getting into the tub. This way, you can ensure that the water is free of bacteria before getting into it.
Our showroom in Fermoy Garden Centre, Newton Abbot, Devon, gives you the opportunity to walk around and see the different models on offer, along with the unique combinations of features and sizes, so that you can find the product that suits you and your lifestyle. Elite Spas and Leisure also have a presence in Trelawney Garden Centre, Cornwall, where you can get a complimentary drink when purchasing a large item.
You should also check the pH levels of your water. You should always maintain a pH range between 7.2 and 7.8. Having too low or too high a pH level can cause corrosion and irritate your skin and eyes. In addition, you should use a total alkalinity increaser to raise the alkalinity of your water.
Is it Safe to Use a Hot Tub Without Chemicals?
Another way to keep your hot tub water clean is by using a sanitizer. It should be added to the water every week, and it is important to read the directions on the bottle. While most people use this method, it can be dangerous and even illegal.
Another method to run a hot tub without chemicals is using polyhexamethylene biguanide. This chemical is a gentle sanitizer and is a good alternative to chemically treated water. However, you should test the water regularly for harmful bacteria and algae. Light-based chemicals cannot handle these types of bacteria and algae, so regular testing is important.
Another way to keep your water clean without using chemicals is by using ozone and minerals. You can also use oxidation to remove any remaining health risks. Alternatively, you can use a non-chlorine shock, which doesn’t have a smell and doesn’t alter the chemistry of the water. It is important to keep the pH balance in your hot tub to avoid any harmful toxins. The ideal pH range is 7.2 – 7.5. Test strips can be helpful to monitor your water.
Some outdoor hot tub owners add chlorine to their spa water to sanitize the water. The chemical is effective against bacteria and algae, but the chlorine also creates chloramines, which are smelly. This means that you need to replenish the amount of chlorine you add every couple of days.
A hot tub owner should change the water at least every three or four months. If the spa has been used regularly, it should be changed more often. It is also important to check the total dissolved solids (TDS) level of the water, which is the same as the sugar in a cup of tea. If you don’t want to add chemicals, then you can purchase mineral-based sanitizers instead.